The cooling tower is a cooling device, which makes the hot water in the tower be cooled mainly by the evaporative cooling of water. To make full use of water resources, reduce the load of the urban tap water supply network, and reduce the operating cost, cooling water is treated by the cooling tower and recycled.

"Fill" is a medium that is used in cooling towers to increase the surface area available for the water.

In a cooling tower, the important is cooling tower fill. Fill is a plastic sheet used in cooling towers to build the more surface region of the tower. If we want to expand the surface, we need to consider into making more contact with water and fills, so that water will have more surface area in the cooling tower fill.

Cooling tower fills make hot water have much more surface area with sheet and air and the medium of tremendously extended film fills so that hot water is cooled quickly.

After being cooled the water is flowed into a water container from which it is pumped again to cool other hot water, and the warm air leaves the fill and releases from the above of the cooling towers, and like this Continuously cooling air from the bottom and release warm air from above to keep cooling tower cooling hot water continuously, to reduce the load of urban tap water supply network, and reduce the operating cost, So that we could make full use of water resources.

The filler is the most important part of the cooling tower, and its efficiency depends on the extent to which the cooling water and air are fully in contact with the filler. Filler temperature 50 °C ~ 68 °C, anti-aging, excellent performance, anti-ultraviolet, long life.

Cooling tower fill should be made to have more contact with water and fills, and longest time as possible. Fill allows the water to form thin flowing sheets to expose as much water surface area as possible to the interacting flow.

Types of cooling tower fill.

A cooling tower's performance is determined by many factors, cooling tower fills are one of the most important parts of a cooling tower, their types and quality decide whether a cooling tower can transfer heat efficiently or not. If you choose the right type of cooling tower fill, water will flow much more surface area, hot water will be cooled quickly.